diff --git a/src/components/devices/CarReverseGuideLine.tsx b/src/components/devices/CarReverseGuideLine.tsx index 645ff1d..8afd30e 100644 --- a/src/components/devices/CarReverseGuideLine.tsx +++ b/src/components/devices/CarReverseGuideLine.tsx @@ -1,132 +1,200 @@ -import React, { useEffect, useRef } from 'react'; +import React, { useEffect, useRef, useState } from 'react'; + type GuideLineProps = { /** 方向 forward前进 reverse倒车 */ direction: 'forward' | 'reverse'; /** 方向盘转角,单位°:左转负数,右转正数,范围建议 -45 ~ 45 */ steer: number; - /** 画布宽度 */ - width?: number; - /** 画布高度 */ - height?: number; - /** 引导线底部(车尾端)两条线间距 */ + /** 引导线底部(车尾端)两条线间距,默认为容器宽度的 40% */ bottomGap?: number; - /** 引导线顶部(远端)两条线间距 */ + /** 引导线顶部(远端)两条线间距,默认为容器宽度的 20% */ topGap?: number; + /** 是否显示辅助线 */ + visible?: boolean; }; + const CarReverseGuideLine: React.FC = ({ direction, steer, - width = 640, - height = 480, - bottomGap = 100, - topGap = 160, + bottomGap, + topGap, + visible = true, }) => { const canvasRef = useRef(null); + const containerRef = useRef(null); + const [size, setSize] = useState({ width: 0, height: 0 }); + + // 监听容器大小变化 + useEffect(() => { + if (!containerRef.current) return; + const resizeObserver = new ResizeObserver((entries) => { + for (const entry of entries) { + const { width, height } = entry.contentRect; + setSize({ width, height }); + } + }); + resizeObserver.observe(containerRef.current); + return () => resizeObserver.disconnect(); + }, []); + useEffect(() => { const canvas = canvasRef.current; - if (!canvas) return; + if (!canvas || size.width === 0 || size.height === 0 || !visible) return; + const ctx = canvas.getContext('2d'); if (!ctx) return; + + const { width, height } = size; ctx.clearRect(0, 0, width, height); - // 车尾中心点(画布底部) - const baseX = width / 2; - const baseY = height - 20; - const totalDist = direction === 'reverse' ? height * 0.82 : height * 0.68; + + // 基础参数计算 + // 前向视角:下面宽(近处),上面窄(远处) + // 后向视角:上面宽(远处固定点),下面窄(近处转弯点) + let bGap = bottomGap || (direction === 'reverse' ? width * 0.25 : width * 0.45); + let tGap = topGap || (direction === 'reverse' ? width * 0.45 : width * 0.25); + const maxWheelAngle = 45; - // 限制车轮转角范围 const wheelAngleRad = Math.max(-maxWheelAngle, Math.min(maxWheelAngle, steer)) * Math.PI / 180; - const step = 2; // 步长,越小曲线越平滑 + const step = 2; // 迭代计算轨迹点函数 const getPathPoints = (side: 'left' | 'right'): [number, number][] => { const points: [number, number][] = []; - let x = baseX; - let y = baseY; - let angle = -Math.PI / 2; // 初始朝向:向上(画布Y减小方向) + const totalDist = direction === 'reverse' ? height * 0.75 : height * 0.7; const stepCount = Math.floor(totalDist / step); - points.push([x, y]); - for (let i = 0; i < stepCount; i++) { - // 当前进度 0~1,0=底部起点,1=最远顶部 - const progress = i / stepCount; - // 线性插值:从底部gap过渡到顶部gap - const currentGap = bottomGap * (1 - progress) + topGap * progress; - const sideOffset = side === 'left' ? -currentGap / 2 : currentGap / 2; - if (Math.abs(wheelAngleRad) < 0.001) { - // 回正:直线向上 - y -= step; - } else { - // 有转向:改变朝向,再前进一小步 - const turnStepRad = step * Math.tan(wheelAngleRad) / 240; - // 分母240:控制转弯曲率,调大转弯更平缓;调小弯更急 - angle += turnStepRad; - x += Math.cos(angle) * step; - y += Math.sin(angle) * step; + if (direction === 'forward') { + // 前视角:底部固定,向上延伸并转向 + let x = width / 2; + let y = height - 20; + let angle = -Math.PI / 2; + + for (let i = 0; i <= stepCount; i++) { + const progress = i / stepCount; + const currentGap = bGap * (1 - progress) + tGap * progress; + const sideOffset = side === 'left' ? -currentGap / 2 : currentGap / 2; + + if (Math.abs(wheelAngleRad) > 0.001) { + // 恢复前视转向灵敏度:使用固定曲率 + const curvature = height * 0.5; + const turnStepRad = (step * Math.tan(wheelAngleRad)) / curvature; + angle += turnStepRad; + x += Math.cos(angle) * step; + y += Math.sin(angle) * step; + } else { + y -= step; + } + points.push([x + sideOffset, y]); + if (y < 0) break; } - // 叠加当前侧边偏移 - const px = x + sideOffset; - const py = y; - points.push([px, py]); - // 超出画布提前停止绘制 - if (py < 0 || px < 0 || px > width) break; + } else { + // 后视角:顶部固定点,向下延伸至底部并随转向摆动 + // 我们从顶部 (width/2, height - totalDist) 开始向下画 + let x = width / 2; + let startY = height - totalDist - 20; + let y = startY; + let angle = Math.PI / 2; // 向下 + + for (let i = 0; i <= stepCount; i++) { + const progress = i / stepCount; // 0 是顶部,1 是底部 + // 后视角透视:progress=0(顶部)时使用 tGap,progress=1(底部)时使用 bGap + const currentGap = tGap * (1 - progress) + bGap * progress; + const sideOffset = side === 'left' ? currentGap / 2 : -currentGap / 2; + + if (Math.abs(wheelAngleRad) > 0.001) { + // 转向逻辑:从顶部向下走,底部随 steer 摆动 + // steer 为负(左打)时,底部应该向左摆动(x减小) + const curvature = height * 0.5; // 与前视角保持一致的曲率灵敏度 + const turnStepRad = (step * Math.tan(wheelAngleRad)) / curvature; + angle -= turnStepRad; // 后视角向下绘制,减去增量以实现正确的左右转向 + x += Math.cos(angle) * step; + y += Math.sin(angle) * step; + } else { + y += step; + } + points.push([x + sideOffset, y]); + } + // 后视角的点是从上往下的,为了统一绘制逻辑(从下往上渐变),我们翻转数组 + points.reverse(); } + return points; }; // 绘制左右两条轨迹 - ctx.lineWidth = 3; - ctx.strokeStyle = '#0f0'; - ctx.setLineDash([]); const leftPath = getPathPoints('left'); const rightPath = getPathPoints('right'); - const drawPath = (pts: [number, number][]) => { + + const drawPath = (pts: [number, number][], color: string, dash: number[] = []) => { + if (pts.length < 2) return; ctx.beginPath(); - pts.forEach(([px, py], idx) => { - if (idx === 0) ctx.moveTo(px, py); - else ctx.lineTo(px, py); - }); + ctx.lineWidth = 4; + ctx.strokeStyle = color; + ctx.setLineDash(dash); + ctx.lineJoin = 'round'; + ctx.lineCap = 'round'; + + ctx.moveTo(pts[0][0], pts[0][1]); + for (let i = 1; i < pts.length; i++) { + ctx.lineTo(pts[i][0], pts[i][1]); + } ctx.stroke(); - ctx.beginPath(); // 强制清空当前路径缓存!重点! }; - drawPath(leftPath); - drawPath(rightPath); + + // 渐变色绘制 + const gradient = ctx.createLinearGradient(0, height, 0, 0); + gradient.addColorStop(0, 'rgba(0, 255, 0, 0.8)'); // 近处绿色 + gradient.addColorStop(0.5, 'rgba(255, 255, 0, 0.8)'); // 中间黄色 + gradient.addColorStop(1, 'rgba(255, 0, 0, 0.8)'); // 远处红色 + + drawPath(leftPath, gradient); + drawPath(rightPath, gradient); // ========== 横向距离标记虚线 ========== - ctx.strokeStyle = '#ff0'; ctx.lineWidth = 2; - ctx.setLineDash([8, 6]); - const markCount = 3; + ctx.setLineDash([10, 8]); + const markCount = 4; for (let m = 1; m <= markCount; m++) { const ratio = m / (markCount + 1); const idx = Math.floor(leftPath.length * ratio); - if (idx >= leftPath.length) continue; + if (idx >= leftPath.length || idx >= rightPath.length) continue; + const [lx, ly] = leftPath[idx]; const [rx, ry] = rightPath[idx]; + + // 根据距离改变颜色 + ctx.strokeStyle = ratio < 0.3 ? 'rgba(0, 255, 0, 0.6)' : + ratio < 0.7 ? 'rgba(255, 255, 0, 0.6)' : 'rgba(255, 0, 0, 0.6)'; + ctx.beginPath(); ctx.moveTo(lx, ly); ctx.lineTo(rx, ry); ctx.stroke(); } - // ========== 车身底部框 ========== - //ctx.setLineDash([]); - //ctx.strokeStyle = '#0ff'; - //ctx.lineWidth = 2; - //ctx.beginPath(); - //ctx.rect(baseX - bottomGap / 2, baseY - 30, bottomGap, 30); - //ctx.stroke(); - }, [direction, steer, width, height, bottomGap, topGap]); + }, [direction, steer, size, bottomGap, topGap, visible]); return ( -
- {/* 背景倒车画面,可以替换 video / img */} +
); }; + export default CarReverseGuideLine; diff --git a/src/components/devices/DeviceStatusPage.tsx b/src/components/devices/DeviceStatusPage.tsx index 2233127..d5e641a 100644 --- a/src/components/devices/DeviceStatusPage.tsx +++ b/src/components/devices/DeviceStatusPage.tsx @@ -96,10 +96,6 @@ export default function DeviceStatusPage() { const hasRequestedControlRef = useRef(false); const [messageApi, contextHolder] = message.useMessage(); - const [direction, setDirection] = useState<'forward' | 'reverse'>('reverse'); - const [steer, setSteer] = useState(0); - - // 视频播放开关 const [isVideoPlaying, setIsVideoPlaying] = useState(false); @@ -673,17 +669,17 @@ export default function DeviceStatusPage() { const handleGamepadUpdate = useCallback((state) => { console.log('handleGamepadUpdate called with state:', isControlled); // 无控制权限时:不发送消息,且只发起一次权限申请(避免手柄/方向盘高频更新刷屏) - if (!isControlled) { - if (!hasRequestedControlRef.current && !connecting) { - hasRequestedControlRef.current = true; - handleControlModal(); - } - return; - } + //if (!isControlled) { + // //if (!hasRequestedControlRef.current && !connecting) { + // // hasRequestedControlRef.current = true; + // // handleControlModal(); + // //} + // return; + //} console.log('Gamepad state updated:', state); // 记录方向盘 xy 坐标,用于倒车影像叠加层 if (state?.axes) { - setSteerXY({ x: state.axes[0] || 0, y: state.axes[1] || 0 }); + setSteerXY({ x: state.axes[2] || 0, y: state.axes[1] || 0 }); } controllerRef.current?.sendGamepad(state); }, [isControlled, connecting]); @@ -974,32 +970,6 @@ export default function DeviceStatusPage() {
- {/*
- - -
- 方向盘转角:{steer}° -
- setSteer(Number(e.target.value))} - /> -

左滑:左转(负数)|右滑:右转(正数)

-
-
- */} - -
{contextHolder} @@ -1347,7 +1317,11 @@ export default function DeviceStatusPage() {
{/**/} - +
) : (
@@ -1363,19 +1337,17 @@ export default function DeviceStatusPage() { error={error} ready={ready} /> + {mowerView === 'back' && ( + + )}
) )} - {/* 倒车影像叠加层:根据方向盘 xy 显示转向辅助线 */} - {/*{isVideoPlaying && (*/} - {/**/} - - - {/**/} - {/*//)}*/} - - {/* 视频未加载 / 停止播放的占位 */} {!isVideoPlaying && (
: (isControlled ? : )} - color={connecting ? 'gold' : (isControlled ? 'green' : 'default')} + color={connecting ? 'gold' : (isControlled ? 'green' : 'red')} style={{ margin: 0, fontSize: 12 }} > {connecting